|
You can configure static ARP on Ruijie switches according to the following command: Switch# configure terminal Switch(config)# arp 1.1.1.1 4e54.3800.0002 arpa (IPaddress : 1.1.1.1 MAC address :4e54.3800.0002) Switch(config)#end Switch#wr |
How? I didn't understand that. Why isn't there any transaction from the interface menu? |
Özgür Öztürk replied at 2023-9-28 19:11 Dear Özgür Öztürk, Please kindly note the static ARP configuration in the original post is for Ruijie enterprise switches only. If you want to configure anti-arp spoofing on NBS series switches, please kindly refer to the web-based configuration as follows: https://www.ruijienetworks.com/resources/preview/rg-nbs-series-switches-web-based-configuration-guide-1-230  Best regards, Jayden |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
