Choose Wireless>Country/Region> Country/Region. Choose the target country/region from the drop-down list and click Save. Note: the country/region code is changed, the Wi-Fi network will restart, and the NVR and the camera will be connected after the Wi-Fi network is restarted. If you change the country/region code in the case of device disconnection, the WDS connection may fail. The current channel may be switched to Auto because it is not supported by the country/region. Therefore, exercise caution when performing this operation. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
