|
You can use this command to power on or off the specified board. power{on | off} [switch devid] slot slotid on: Powers on the specified board. off:Powers off thespecified board. switchdevid: It is supported inVSU mode only. It specifies the chassis No. of the specified board to be powered on/off. By default, it refers to the current chassis. slot slotid: Specifies the slot No. of the board to be powered on/off. The supervisor modules are inserted in M1 and M2 slots. The FE cards are inserted in FE1, FE2,FE3, and FE4 slots. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
