EW300 seems to use TKIP instead of AES in WPA2-PSK mode
| <p>I have deployed a pair of EW300, which work well, but iOS devices report Weak Security indicating WPA/WPA2 is in use, when the router is ocnfigured to use WPA2-PSK only. It seems the change from WPA/WPA2 to WPA2-PSK is not working correctly.</p><p><img alt="image.png" src="data/attachment/forum/202307/10/162454a9hhjh30p0112j93.png" width="556" height="284"></p><p>This is on the latest firmware available.<br></p> |
|
Hi sir, May I know your device SN and firmware version? I checked Advanced Encryption Standard (AES), which is more secure than TKIP, is recommended. |
GTAC-Steve replied at 2023-7-10 16:29 Hi Steve Firmware: ReyeeOS 1.204.1810 Serial: G1RP6JL041395 G1RP6JL050222 |
Symlogia Helpdesk replied at 2023-7-10 16:43 Hi sir, Cov I cannot check the photo which you send with me, may you send it to my email? This is my email:liuxiyang@ruijie.com.cn |
|
Hello Symlogia Helpdesk, I have the same problem. My EW1200G-PRO is configure to use WAP2-PSK only. However I get the weak TKIP encryption error on all my apple devices (iPhone and Mac). Can you advise how to fix it? This is the my device info:
|
JuanK-50237 replied at 2023-7-17 00:31 You can change the password to a more complex one and test again. It may be because of the trust certificate of the iPhone. Please check my test results below:   |
JuanK-50237 replied at 2023-7-17 00:31 Hi sir, May you show me your EW1200G-PRO configuration and iPhone and Mac issue screenshot? Best regards, Steve |
GTAC-Micca replied at 2023-7-17 12:07 My Wi-Fi password is a 14 character string combining numbers, special characters and upper/lower. I don't believe it is weak, any other recommendation? I do have WAP2-PSK enforce, but can't select AES over TKIP.  |
GTAC-Steve replied at 2023-7-17 12:09 Sure this is the EW1200G-PRO configuration:  And this is the Mac error:  |
JuanK-50237 replied at 2023-7-17 22:24 Hi sir, Thank you , I will check it first |
JuanK-50237 replied at 2023-7-17 22:24 Hi sir, Thank you , I will check it first |
JuanK-50237 replied at 2023-7-17 22:22 Hi sir, Thank you , I will check it first |
JuanK-50237 replied at 2023-7-17 22:22 Would you mind share with me what password you configure on your device then I can test with same password on my device? If it is not convenient for you to public password, you can send the password to my email: guominxiang@ruijie.com.cn |
GTAC-Micca replied at 2023-7-18 13:51 Hello GTAC-Micca, I believe I fix it but I'm curios why behavior is this way. My original setup was with separate SSIDs for 2.4Ghz and 5Ghz networks, this configuration was giving weak TKIP errors on every apple device. For testing purposes I enabled Dual-Band Single SSID and it fixed the error with no changes to the password. I don't need separate SSIDs, so this is ok. But ideally this should not affect the encryption. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
