|
By configuring a static MAC address, users can manually bind the MAC address of a downlink network device with a port of the switch. After you add a static MAC address, when the device receives a packet destined for this address from VLAN, it forwards the packet to the specified port. 1. Choose Switch Settings > Static MAC.  2. Entera MAC address, specify a VLAN ID, and select the outbound port. Then click Add to add a static MAC address. The MAC address entries will be updated accordingly in the MAC address table.  3. If you want to delete a static MAC address, select the MAC address entry you want to delete in the table and click Delete.  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
