|
You can use a USB flash drive to back up Ruijie switch configurations as follows: 1.Networking topology  2. Configuration procedure  (2) Insert the USB flash drive in FAT32 format into the USB port of the device (if the USB flash drive format is not FAT32, you can format the USB flash drive) (3) Log in to the switch and run the following command on the switch to back up the configuration of the switch to the USB flash drive: Ruijie#copy flash:config.text usb0:config.text------> No spaces between usb0 and config.text 3.Plug the USB flash drive into your computer to see if there is already a file named config.text on the USB flash drive  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
