|
Step1: Check that the network cable is properlyconnected to the WAN port of the device and the corresponding LED indicatorblinks or is steady on. Step2: Check whether the PPPoE correspondingconfiguration (including dialing parameters, username and password) is correct. Step3: Check whether the interface MTU configuration is correct. The mtu value of the pppoe client needs to be 1492 or less.  Step4: Replace PC directly connect to the ISP tocheck whether it can dial up normally.If PC also fails to dial up, pleasecontact the ISP to solve this issue. Step5: If the PC can dial up normally, you can try to modify the mac address of the dial-up interface to the mac address of the PC network adapter to test whether it is normal. Step 6  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
