Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Wireless

View: 2661|Reply: 1

Error code analysis for User Offline in Second Generation Web Authentication Mode

[Copy link]

10

Digests

994

Posts

1107

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1107
Post time 2018-4-10 08:32:49 | Show all posts |Read mode
Error code analysis for User Offline in Second Generation Web Authentication Mode
Reply

Use magic Report

10

Digests

994

Posts

1107

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1107
 Author| Post time 2018-4-10 08:33:10 | Show all posts
01: The user actively goes offline.
02: The port is disconnected. On a wirelessnetwork, STAMG notifies STA to go offline. In this case, contact STAMG owner tolocate the cause.
03: The service is unavailable mainly due toconnection interruption.
04: Idle status times out. The user having notraffic is kicked out.
05: Session times out. The duration reaches.
06: The administrator resetsthe port or session to kick out users from the RADIUS server, kick out escapedusers after restoring the Portal server, or run the clear command to deleteusers.
07: The administrator restarts NAS.
08: The port has an error and required tointerrupt the session
09: NAS has an error and required interruptingthe session.
10: NAS requires interrupting the session dueto other reasons.
11: NAS is restarted accidentally.
12: NAS thinks there is no need to retain theport and interrupts the session.
13: NAS interrupts the session to allocatethis port.
14: NAS interrupts the session to suspend theport.
15: NAS fails to provide the requiredservice.
16: NAS interrupts the currentsession to call back the new session.
17: Information entered by the user isincorrect.
18: The host requires interrupting thesession.
103: The IP or MAC address has changed oroccupied.
115: The service is switched over.
122: The traffic is exhausted.
250: The low-traffic user is kicked out. Itis a unique attribute of Ruijie AP and the cause is same to code 4.
500: Authentication times out. The RADIUSauthentication packet is not responded within the time limit. This attribute isavailable for wireless wlog module and will be provided for SNC later.
501: Authentication is denied by the RADIUSserver. This attribute is available for wireless wlog module and will beprovided for SNC later.
502: The number of users on the device hasreached the upper limit. This attribute is available for wireless wlog moduleand will be provided for SNC later.

Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now