Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Wireless

View: 2704|Reply: 1

Definition of errcode in the Portal Protocol

[Copy link]

10

Digests

994

Posts

1107

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1107
Post time 2018-4-10 08:33:51 | Show all posts |Read mode
Definition of errcode in the Portal Protocol
Reply

Use magic Report

10

Digests

994

Posts

1107

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1107
 Author| Post time 2018-4-10 08:35:04 | Show all posts
(1) When the Type value is set to 2, inack_challenge:
ErrCode = 0: The AC informs the Portal server that the Challenge request is successful.
ErrCode = 1: The AC informs the Portal server that the Challenge request is denied because the portal packet has an error orthe user does not exist on the AC.
ErrCode = 2: The AC informs the Portal server that the link is created. When another authentication request is sent after theuser has passed authentication, errcode2 is returned.
ErrCode = 3: The AC informs the Portal server that a user is being authenticated and the request should be sent later. The AC has sent an authentication request to the RADIUS server but RADIUS server does not send response. If the Portal server sends req_challeage during this periodof time, errcode3 is returned.
ErrCode = 4: The AC informs the Portal server that the user's Challenge request fails because the AC has an inner error.
Note: When the ErrCode is not 0, see theErrID value to find the cause.

(2) When the Type value is set to 4, inack_auth:
ErrCode = 0: The AC informs the Portal serverthat the user authentication is successful.
ErrCode = 1: The AC informs the Portal serverthat the user authentication request is denied because the portal packet has anerror (due to incorrect req_id or portal attribute) or the RADIUS serverreturns the authentication rejection packet.
ErrCode = 2: The AC informs the Portal serverthat the link has been created.
ErrCode = 3: The AC informs the Portal serverthat a user is being authenticated and the request should be sent later.
ErrCode = 4: The AC informs the Portal serverthat the user's authentication request fails because of an error.
Note: When the ErrCode is not 0, see theErrID value to find the cause.

Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now