|
1. Introduction: In this scenario, the networks of the HQ and Branch are connected to the Internet through fixed gateways, and the networking is relatively fixed. For now, Ruijie Cloud only supports IPSec VPN mode when you choose Side-To-Side VPN. 2. Topology:  3. Configuration Steps on VPN Server side: 3.1 Login to the Ruijie Cloud, go to the project where your gateway is currently in. Click the VPN button.  3.2 Click Add VPN Policy button, choose the Side-To-Side VPN, choose Headquarters as the role, and set the other VPN parameters. Please note that the IP Subnet can not be conflicted on both sides, and the pre-share key & advanced setting must be the same on both sides.   4. Configuration Steps on VPN Branch side: For the Branch project, you need to choose the Branch as the role, and input the correct HQ IP or domain, Please note that the IP Subnet can not be conflicted on both sides, and the pre-share key & advanced setting must be the same on both sides.  5. Result: You can check the VPN connection status on Ruijie Cloud like this:  You can also check the status on the eweb page of your Reyee device:  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
