1. Ensure you connect to the Ruijie EG in the following steps Note: If the primary process of the device is lost for some reason, try to restore it by using the ctrl layer. Main process loss will result in the PWR and SYS lights always on, but other port lights are not. 2. Download the main process from our official website： https://www.ruijienetworks.com/support 3. Change file name as ‘rgos.bin’， run TFTP server, and choose file location.  4. Open PUTTY, turn off power then turn on. Input ‘CTRL+C’ in PUTTY consecutively until the following menu appears  5. Input ‘0’ behind the prompt ‘Press a key to run the command’. 6. Then input ‘1’ behind the prompt ‘Press a key to run the command’. Input ‘y’ behind the prompt ‘Determined to upgrade?’ .  7. Press ‘CTRL+Z‘back to the upper menu. Input ‘2’ behind the prompt ‘Press a key to run the command’ to restart and load the main process. 8. You could access the WEB interface to confirm if it is successful. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
