Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Wireless

View: 2650|Reply: 1

How to fix when modification to the non-root AP do not take effect on the AC?

[Copy link]

10

Digests

994

Posts

1107

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1107
Post time 2018-4-11 22:33:54 | Show all posts |Read mode
How to fix when modification to the non-root AP do not take effect on the AC?
Reply

Use magic Report

10

Digests

994

Posts

1107

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1107
 Author| Post time 2018-4-11 22:34:44 | Show all posts

All the commands for modifying the non-rootbridge configuration take effect only after the wds config commit command is run.

In ap-configmode, run the wds config [ clear |commit ] radio radio-id command. The parameters are described below:

clear: Clears WDS configuration that does nottake effect.
commit: Commits WDS configuration that doesnot take effect. After the operation, the bridge is disconnected and thenconnected.
radio radio-id: Indicates the radio IDconfigured on the AC.

If the AP is in non-root mode, its radioenters the wds edit mode. At this time, most of wds commands do not take effectimmediately. You can run the show ap-config wds-config command to display theconfigurations. After confirming that the configurations are correct, run thiscommand to commit the modification.
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now