|
When you fail to do WISP on Reyee EW1200G Pro, you may follow these steps to troubleshooting first: 1.Check the distance between Reyee EW1200G Pro and the other router to see if the distance is too long or not. If so, please try to make them closer. 2.Check if there are obstacles between Reyee EW1200G Pro and another router, how thick, etc. 3.Check if you choose the right mode（WISP Mode）on Reyee EW1200G Pro 4.Check if the WiFi password is correct or not when you do WISP on Reyee EW1200G Pro. 5.Check the LED status of Reyee EW1200G Pro and the other router is normal or not. 6.Check if the uplink main router has set blacklist for blocking Reyee EW1200G Pro or not. 7.You may try factory reset this Reyee EW1200G by pressing the reset button for more than 10 seconds. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
