How to check if I can't log in to ES switch?
|
You can check according to the following steps 1. Check whether the status light of the device is normal.   2. Use the LAN cable to connect the port of the PC and switch, and check whether the switch port is normally on.  3. Check if the PC can ping the IP Address of ES. You need to change your PC's IP Address to 10.44.77.100. The default IP address of ES is 10.44.77.200. Even if ES obtains a new IP address you can still access it through the default address 4. After entering the web interface of the ES device, you need to enter the username and password. The default username and password are admin.If you forget the device IP address or password, press and hold the Reset button on the device panel for more than 5 seconds to restore factory settings 5. If you still can't log in to the device, you can consult us in Live chat, and we will determine whether it is a hardware failure. www.ruijienetworks.com/rita |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
