Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Wireless

View: 2442|Reply: 1

How to configure the multicast-to-unicast function

[Copy link]

10

Digests

994

Posts

1107

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1107
Post time 2018-4-12 00:53:18 | Show all posts |Read mode
How to configure the multicast-to-unicast function
Reply

Use magic Report

10

Digests

994

Posts

1107

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1107
 Author| Post time 2018-4-12 00:54:03 | Show all posts
The multicast-to-unicast function is used tomake multicast video smoother.

Configuration reference:
(1) Enable the multicast routing protocol ina Layer-3 device in the same broadcast domain.
(2)
In fit (ap-config) mode, run the followingcommand:
Ruijie(config)# ip igmpsnooping   ----->Enables igmp snooping for all VLANS. Toenable this function for certain VLANs, run the ip igmp snooping vlan 1 command.
Ruijie(config)#ap-config xxx
Ruijie(config-ap)# igmp snoopingmcast-to-unicast enable
Ruijie(config-ap)# igmp snoopingmcast-to-unicast group-range ip-addrip-addr    ----->(Optional) Defines themulticast-to-unicast scope.
In fat mode, run the following command:
Ruijie(config)#ip igmpsnooping      ----->Enables igmp snooping forall VLANS. To enable this function for certain VLANs, run the ip igmp snooping vlan 1 command.
Ruijie(config)#ip igmp snoopingmcast-to-unicast enable

Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now