|
1. RG-EW3200GX PRO can work at access point mode. You can set the EW3200GX PRO to work in AP mode, so that both the user and the EW get ip addresses and Internet access through the uplink device. You can refer to this post about configuration: https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=5527&extra=page%3D1 2. EW series cannot mesh with RAP, please refer to this post: https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=4524&extra=page%3D1 3. Currently EW3200GX PRO do not has the option to disable NAT, if you need to disable, you can switch the work mode to access point mode. This mode does not have the NAT function |
GTAC-Micca replied at 2023-8-30 13:36 Thank you for a good and clear response. Much appreciated. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd