RG-EW1200 - Disable Automatic Mesh \ Wireless repeater mode
|
Hello Support How do I disable RG-EW1200 going automatically from Access Mode(LAN Cable) into Mesh \ Wireless Repeater mode. I want to manually choose what mode the routers must go into. Ruijienetworks it must be the user's decision to choose manually the mode not automatically. This problem must be fix asap Waiting for your feedback and help |
|
Dear sir You can try to disable reyee mesh function by clicking More> Advanced > ReyeeMesh to avoid the router automatically mesh. Best regards Jenny |
GTAC-Jenny replied at 2023-9-22 15:07 Doesnt work....    |
Jacques Rossouw replied at 2023-9-27 13:07 Dear sir Sorry EW routers in the latest firmware version can not support disabling this function. Sorry for the inconvenience. Best regards Jenny |
GTAC-Jenny replied at 2023-9-27 13:39 Please fix this problem immediately. Enable this this function. This is wrong, I as the user must have the option to choose to enable\disable functions.... |
Jacques Rossouw replied at 2023-9-27 14:35 Dear sir Okay I will feedback your requirement to our team. You may share with me the router network so that our R&D can login to it remotely to disable that option. You can share with to my email: yujiamin1@ruijie.com.cn. Sorry for making you any inconvenience.  Best regards Jenny |
GTAC-Jenny replied at 2023-9-27 15:00 Emailed shared with shared linked. Thank you. Very urgent - critical... |
Jacques Rossouw replied at 2023-9-27 15:12 Users Devices - mobile phones and notebook struggling to connect to wifi....internet speed test 0 Mbps |
Jacques Rossouw replied at 2023-9-27 15:20 Dear sir Please help confirm the following thing to further check this speed issue: 1. May I know whether all the EW routers have the same issue? 2. May I know how far the user are from the router to connect to the wifi. You may check the user wireless negotiate rate to check whether it is normal.  3. It is also recommended to do wifi optimization on cloud and connect to 5G to further check. 4. If the problem is still not solved, you can contact with us on Rita Live(https://www.ruijienetworks.com/rita ) with this case ID: CS20230927-2486034 for the problem. Thank you for your cooperation. Best regards Jenny |
GTAC-Jenny replied at 2023-9-27 15:44 1. Yes all EW routers have the same issue. 2. I and users are standing right next to EW router. I tested myself 3. I did wifi optimization already - no difference. 4. What I saw is that mobile phones, notebooks, wifi cameras that using 2.4Ghz - Speed test 0Mbps Devices that uses 5Ghz works much better and get good Speed test 40-200Mbps Its seems like the 2.4 Ghz is having the most problems....not sure why. Maybe because Mesh is on |
Jacques Rossouw replied at 2023-9-27 15:58 Dear sir Here are some suggestions when you adjust the settings: (1) The AP power must be appropriate and the signal is not interrupted between the aps. The ideal signal strength is -65dbm in AP coverage area edge (2) The adjacent AP channels must be non-overlapped channel to avoid same frequency interference and packet loss. For example in non-high-density deployment scenarios, 2.4G channels are recommended to use 3 non-overlapping channels 1, 6, and 11 for planning. If it is a high-density deployment site, it is recommended to use 4 channels 1, 5, 9, and 13 for planning. Best regards Jenny |
GTAC-Jenny replied at 2023-9-27 16:30 Ok I have configured 4 channels 1, 5, 9, and 13 and signal strength is set to 65 dbm .... lets see if it works All the problems started after Mesh was enabled with new firmware  |
Jacques Rossouw replied at 2023-9-27 17:58 R&D Team disabled the Wifi Mesh on Ruijie Cloud. This resolved the wifi problems. 2.4Ghz & 5Ghz device can now and good internet speeds. Please do not enable Wifi Mesh in the future....Remember this !!!!!! |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
