PPTP/L2TP VPN
|
PPTP/L2TP VPN |
|
The following steps can be used to understand why a PPTP/L2TP VPN user is experiencing disconnections from NGFW firewall, and to enable the appropriate debug depending on the type of PPTP/L2TP VPN User. Collect below information and send to Ruijie support. 1. A PPTP/l2TP VPN user connects to the NGFW firewall with local authentication. RG-WALL#diag deb enable RG-WALL#diag deb reset RG-WALL#diag deb console timestamp en RG-WALL#diag deb app ppp -1 2. If the PPTP VPN User uses authentication with LDAP then enable the following debug with step. diag test auth ldap (ldapservername in GUI) (username to test) (pwd user) diag test auth ldap LDAP_Server user password 3. If the PPTP VPN User uses Radius then also collect the following debug. diag test authserver radius <server_name> <chap | pap | mschap | mschap2> <username> <password> 4. Collect a sniffer trace on the port of the PPTP/L2TP connection. diag sniffer packet <port of pptp/l2tp connection> 'local_ip_addr of pc' 6 |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
