Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


WIS

View: 3788|Reply: 1

AC cannot connect to WIS

[Copy link]

14

Digests

1028

Posts

1161

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1161
Post time 2018-8-13 10:04:53 | Show all posts |Read mode
How to troubleshoot if the AC cannot connect to WIS
Reply

Use magic Report

14

Digests

1028

Posts

1161

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1161
 Author| Post time 2018-8-13 10:07:11 | Show all posts
Step 1: run the "wis debug-cli 12" command on AC

Ruijie(Config)# wis debug-cli 12

Wis_global_enable     [enable]   -----whether the function is enabled  

Wis_control_enable    [enable]   -----whether the communication between AC and WIS is normal

Server  [xx.xx.xx.xx:port]         ------whether the WIS server address is configured

Source  [a.b.c.d]                       ------whether the source IP is designated

If "Wis_control_enable" shows disabled, it means the AC cannot access to the WIS server. You need to check the internet connection and make sure the AC can access to the internet first.



Step 2: run the following commands on ac:
Ruijie#run-system-shell
~ # curl -I http://35.187.254.197:80/wis/tlv

If the command returns any kind of error, like "couldn't connect to server" or "login is required", it means there would be a firewall in the network or authentication is required. We need to make sure the tunnel from AC to WIS server's 80 and 443 ports is normal.


Step 3: check the WIS project info on WIS site:
未命名图片.png
未命名图片1.png


We need to make sure the AC's MAC address is correctly added on WIS. Note: If VAC is performed, all MAC addresses of VAC members should be added to WIS.  

If the above steps still cannot resolve your problem, please contact us on Skyep: service_rj@ruijienetworks.com  



Reply Support 1 Not support 0

Use magic Report

You have to log in before you can reply Login | Register now