RAP6262(G) IOT ONLY SUPPORT 2.4G NOT 5G
|
HI THERE, may i know what is the reason when i choose IOT, the frequency band is only 2.4G ? any special on IOT wireless connection ? please advise  |
|
Most IOT Devices do 2,4Ghz only. Reason is the much lower cost, no need for high data rate in such applications and the better range of 2,4Ghz. So with most vendors (and in this case Ruijie/Reyee) the IOT default configuration is 2,4Ghz only. |
poli5681 replied at 2024-2-22 06:04 hi why here it say it support 300m for 5ghz and 100m for 2.4ghz? 2.4ghz supposedly can go longer range right?  |
Mobit Ong replied at 2024-2-22 07:43 Dear all, In response to your questions, the reason why the 5GHz band is not enabled on the IoT network is because the devices that work with IoT technology are configured to use the 2.4GHz band. For coverage, the range in the 5GHz band is greater than in the 2.4GHz band due to antenna gain. Best regards. Karen | Ruijie support team |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
