Introduction on Reyee EG Load Balancing Modes

When multiple links are available, some traffic is forwarded along the link selected based on the address library and the remaining traffic is distributed to other links in load balancing mode.
Reyee EG support 2 load balancing mode：

Load Balancing Mode	Description
Loading balancing	The traffic will be distributed across multiple links according to the weight of each WAN port. Larger traffic will be distributed to the WAN port with a higher weight. When you select this mode, you must specify the weight of each WAN port. For example, if the weight of WAN and WAN 1 ports is set to 3 and 2 respectively, then, 60% of the total traffic will be routed over WAN and 40% over WAN 1.
Active/Secondary	All traffic is routed over the primary interface. Once the primary interface fails, traffic will be switched over to the secondary interface. If there are multiple primary or secondary interfaces, the weight of these interfaces must be set. (See balanced mode.)