How to configure NAT-DMZ on Reyee EG?

Choose One-Device > Gateway >Config > Advanced> Port Mapping >NAT-DMZ.
Click Add.Enter the rule name and internal server IP address, select the interface towhich the rule applies, specify the rule status, and click OK. You can configure only one DMZ rule for an outbound interface.


Table 1-1 DMZ rule configuration

Parameter	Description
Name	Enter  the description of the mapping rule, which is identify the DMZ rule.
Dest  IP Address	Specify  the IP address of the DMZ host to which packets are redirected, that is, the  IP address of the internal server that can be accessed from the Internet.
Outbound  Interface	Specify  the WAN port in the DMZ rule. You can configure only one rule for a WAN port.
Status	Specify  whether the rule is effective. The rule is effective after you turn on Status.