Speed Limit RAP2260 (E)

I configured a speed limit  on cloud :
Device Config, SSID, Edit , Advanced, Single-Client Speed Limit:





but it doesn't work, the speed is always the same as if I hadn't done anything: how can I solve it?

Hello sir,
1. plz check if the ap has been upgraded to the latest firmware version, if it is not, plz upgrade.
2. plz check the ap sync status and make sure it is fully synced

GTAC-Stella replied at 2024-5-3 20:26
Hello sir,
1. plz check if the ap has been upgraded to the latest firmware version, if it is not, pl ...

Hi ,
Firmware is at latest version:

ReyeeOS 2.260.0.1329 Latest

Status Config: Synced

wallnas replied at 2024-5-3 21:02
Hi ,
Firmware is at latest version:
Status Config: Synced

Dear sir

If rate limit still can not take affect
could you share the network with us via this email:liujunhui1@ruijie.com.cn
so we can check further for you
Best regards,
Ross

GTAC-Ross replied at 2024-5-6 15:21
Dear sir

If rate limit still can not take affect

Resolved

Disable

Disabilitare
Single-Client Speed Limit da SSID (Device Config, Wireless, SSID, Edit single SSID

Enable

Device Config, Wireless, Rate Limit, Wireless

wallnas replied at 2024-5-6 23:52
GTAC-Ross replied at 2024-5-6 15:21
Dear sir

still not working for me

EG105GW(T)

Ferdian Sidiq replied at 2024-5-27 14:09
still not working for me

Hi, Ferdian Sidiq

If you are using EG105GW(T) in Router mode, please log into its eWeb and configure Custome Policies of Flow Control to limit the speed of network users, you may refer to section 6.6.3 on page 205 of the following guide:
https://reyee.ruijie.com/en-global/resources/preview/rg-eg-w-web-based-configuration-guide




Best regards,
Jayden