Forgot password?
 Register now

Welcome to use this form to feedback your problems with Ruijie Community

The category of your feedback

Your Feedback

Your Email address (optional):

How to do if Reyee AP can’t be logged in locally? Reply

GTAC-Sophia

Level 5

Ruijie Staff

How to do if Reyee AP can’t be logged in locally?
587 0 2024-5-20 17:10:29
Original
Issue Description
1. Reyee AP can’t be logged viathe IP of WAN port;
2. Reyee AP can’t be logged viathe IP of LAN port;
3. The account and password areincorrect causing the login failure;
Device model and firmware

  Device Type
  
  Device Model
  
  Device Version
  
  Access Point
  
  RAP2260
  
  ReyeeOS 2.230.0.2003
  
Solution

Issue 1. Reyee AP can’t be logged viathe IP of WAN port
If your device is not in the initial stage, Please connect the LAN port or the SSID @Ruijie-SXXXX(XXXX is the last four digits of MAC address of each device) and get the management IP address of RAP, then you can log in to the device via default manageable address 10.44.77.254
If your device is in the initial stage, you can log in to the device by connecting to the LAN port of the device and configuring an IP address that is in the same network segment as 10.44.77.254

Issue 2. Reyee AP can’t be logged viathe IP of LAN port;

Step 1: Check whether the device is online on Ruijie Cloud. If the device isn’t online, please follow this guide
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=3290&extra=page%3D1 to solve it.
Step 2: After Reyee AP is online, you can create a tunnel to log in the device, and check whether the AP is Router mode; If the AP is in Router mode, you can log in to the deivce via it WAN IP.

Issue 3. The account and password areincorrect causing the login failure;
Check that the project password on the Cloud matches the customer's current password. If the device is online, the user's login password is the same as the project password.


Check whether the password of the cloud device is synchronized normally, if not, please click Manually Deliver to manually synchronize the password, after the synchronization is successful, you can use the project password to log in to Reyee AP.


If the device is offline and the password cannot be confirmed, reset the device and log in to the device using the default IP address 10.44.77.254.
RG-RAP2260(E)

Wireless
There are no replies.
Related Posts
Product Model

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2023 Ruijie Networks Co,Ltd