AP Mesh

• Hi, I have a project, i already configured the network, SSID etc, it is up and working for about 5 months already... I just want to config the AP Mesh, but when i scan, no AP detected.. what seems the problem?
• For configuring the AP Mesh, does the AP need to be powered on by power adaptor?
  

Thanks for the answer

Hi Kevin Brya Laurea
I‘m sorry that we can't provide a specific solution for you based on current information.
Can you help to check the following aspects：

• Check whether AP works in the latest firmware version
  Please upgrade the Reyee AP to the latest version (AP 3.0(1)B11P86) before you configure the mesh function.
  
  
• Check If all APs support AP mesh function
  All Reyee AP models support the mesh feature except RG-RAP1200(F), RG-RAP2200(F), RG-EAP602.
  
  
• For the Mesh AP, the salve AP doesn;t need network connection(wired connection) so only need to provide poe power for the AP
  the network connection will be provided from the Master AP(has wired network connection)
  

If the issue still exists,  I would be glad to help you in Community.

GTAC-Ross replied at 2024-6-1 14:10
Hi Kevin Brya Laurea
I‘m sorry that we can't provide a specific solution for you based on current i ...

• 
• this is the latest version on my cloud, AP model is RAP-2260 (G).
  

Also, if all AP have a network connection (wired, directly to poe switch),  mesh won't be applicable?

Kevin Bryan Laurea replied at 2024-6-1 14:15
GTAC-Ross replied at 2024-6-1 14:10
Hi Kevin Brya Laurea
I‘m sorry that we can't provide a specific ...

Dear sir

Yes, for MESH AP
it won't need wired connection and the recommend distance of mesh is within 10 meters


best regards,
Ross

GTAC-Ross replied at 2024-6-1 14:42
Dear sir

Yes, for MESH AP

recommended distance of 10m, with and without obstacles?

Kevin Bryan Laurea replied at 2024-6-1 15:53
recommended distance of 10m, with and without obstacles?

Dear sir

without obstacles