Forgot password?
 Register now

Welcome to use this form to feedback your problems with Ruijie Community

The category of your feedback

Your Feedback

Your Email address (optional):

DDNS of RG-EG3250 Reply

hai doan thanh

Level 1

DDNS of RG-EG3250
182 2 2024-7-5 11:07:05
Original
Hi Everybody,
Sorry if my English no good. I have a problem about DDNS, Management IP, Egress IP of EG3250.

I have:

+ two Wan (Wan 1 : PPPoe, IP Wan 1: 113.162.9.85; Wan 2 : Static IP, IP Wan 2: 10.3.237.60). Wan 1 connect to Gi0/9, Wan 2 connect to Gi0/6

+ DDNS: I choose Public IP, 116.98.248.232. If I choose Wan IP, I can't choose Gi0/9 (it is grey out). Therefore I can choose Auto (10.3.237.60) or Gi0/6 (10.3.237.60)

+ Management IP: 10.3.237.60

+ Egress IP: 116.98.248.232

If I want to change Management IP and Egress IP to 113.162.9.85, I go to IP-Based Route and choose Default Route of 10.3.237.60 from "Primary Route" to "Back up route-1". And then I choose "Back up route-1" to "Primary Route" (I run Balance load). But when Router reboot, the Egress IP is changed to 116.98.248.232, I can't connect with my recorder camera (It use Domain name) and another application as VPN error

Because I have a DDNS with Domain name, and I want Egress IP is alway is 113.162.9.85 to some application : VPN, IPTV, VoiIP. How can I do ? Please help me to solve this problem.

Thank you everyone !



RG-EG3250

Configuration Security and Firewall
0 2024-7-8 18:03:08 View all replies
Hello,

May you help to take the screenshot of routing setting for me?
You can try to configure pbr and set the address to access the cloud server to the port that has a public ip address

Here is the guide of PBR: https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=3842&extra=page%3D1
If the issue still exists, please talk with me again. I would be glad to help you in Community.

Best regards,
Micca

0 2024-7-9 07:34:52 View all replies
GTAC-Micca replied at 2024-7-8 18:03
Hello,

May you help to take the screenshot of routing setting for me?

Dear Mr Gtac-Micca,
When I writed this question, I has changed some IP, sorry about this.
Wan 1, Wan 2 go to DI4(Gi0/9), Gi0/6 of EG3250. And Gi0/1 (of E3250) go to Firewall. From Firewall goto switch core => switch acess


14.238.2.146 is IP Server of ISP 113.161.8.57 (Wan1-PPPoe)

10.2.234.53 is gateway of ISP 10.2.234.54 (Wan 2-Static Wan)

I send to you some Picture. If you need any picture, you send to me to take it. I don't know Command to change default IP of Router. I want Management IP and Egress IP of Router is alway is 113.161.8.57. Please tell me the way to solve this trouble.


















Related Posts
Product Model

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2023 Ruijie Networks Co,Ltd