Forgot password?
 Register now

Welcome to use this form to feedback your problems with Ruijie Community

The category of your feedback

Your Feedback

Your Email address (optional):

General Ways to Locate the Network Issue of RG-WALL Z Series Products Reply

GTAC-Sophia

Level 5

Ruijie Staff

General Ways to Locate the Network Issue of RG-WALL Z Series Products
752 0 2024-7-11 14:08:17
Original
If your downlink devices of RG-WALL can't access the externail network, you can use the following ways to locate the issues:
1. Check the Real-Time Session Info

You can filter the desired sessions by source address

Click View details to check the detailed session information

Src. and Dest.: you can view the source IP address and port number of the session and the source IP address and port number before and after NAT. Based on this information, you can determine whether the NAT policy is correct or not. If the NAT policy is incorrect, the NAT policy configuration may be incorrect too.
Inbound Interface: You can determine the source of traffic based on thisinformation. If you are clear the topology, you can determine the source of traffic based on this information to infer the network.
Outbound Interface: You can check whether the outbound forwarding of traffic is correct or not. If uncorrect, the route, VPN policy, or PBR configurations may be incorrect.
Forward Packets, Reverse Packets, Forward Bytes, Reverse Bytes:indicates the statistics of inbound and outbound traffic and packets. This information helps determine whether the network of the online firewall is faulty.
Security Policy: indicates the security policy matched by the session. Check whether the matching of the security policy meets the expectations. If the matching does not meet the expectations, the security policy may be incorrectly configured.
2. Check with the Network Connectivity Diagnosis
Enter information which need to be analyzed, such as the source address and protocol type of the traffic, and click Diagnose (During the diagnosis process, the traffic to be analyzed must pass through the firewall). You can view the entire process of the traffic processing:

3. Capture the packet

RG-WALL 1600-S3200

Troubleshoot Guide Firewall
There are no replies.
Related Posts
Product Model

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2023 Ruijie Networks Co,Ltd