Please select To the mobile version | Continue to access the desktop computer version
 Forgot password?
 Register now


Application

View: 2936|Reply: 1

[SAM+] In the configuration template, the default-router command is not configured for the DHCP pool. Does this affect the client to obtain the IP address of the gateway?

[Copy link]

10

Digests

1002

Posts

1115

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1115
Post time 2017-5-3 17:22:13 | Show all posts |Read mode
In the configuration template, the default-router command is not configured for the DHCP pool. Does this affect the client to obtain the IP address of the gateway?
Reply

Use magic Report

10

Digests

1002

Posts

1115

Credits

administrator

Rank: 9Rank: 9Rank: 9

Credits
1115
 Author| Post time 2017-5-3 17:22:34 | Show all posts
In network planning, if the default-router command is not configured, the device sends the interface address, as the gateway address, to the client by default. For example, if the network segment configured for the DHCP is 10.0.0.0/24 and the IP address of the VLAN100 interface is 10.0.0.1/24, if the default-router command is not configured, the device sends the IP address of the SVI100, as the gateway address, to the client. It is recommended to configure ”default router” during network deployment because it makes the configuration command planning clear and easy to check.

Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Register now