RG2260 clients show on eweb and direct ip but not show on cloud
|
Edited by User 48944 at 2024-7-28 23:00 From direct ip and eweb show connected clients works just fine.  Somehow on cloud management doesn't show anything.  Systems 1.WAN < > Mikrotik Routerboard <> Cisco L2 Manage (Trunk) <> RG2260 (SSID VLAN , MGMT VLAN works fine). 2.Allowed all firewall filter from RG2260 > 0.0.0.0/0 3.Device synced with cloud. Thanks for advanced. SOLUTION Downgraded firmware to 280 works fine 283 is not working. |
|
Hello, What is the complete version number after the upgrade of version 283? Could you please click the SN of the device for me and then go to the details page of the device to see whether the user information can be seen on the details page?  On the CLI, can you check whether user information is visible in the cloud  Best regards, Micca |
GTAC-Micca replied at 2024-7-29 09:51ReyeeOS 2.283.0.1827 (Not Working) ReyeeOS 2.280.0.1710 (Works) As your asking detail if running on 283 it not show anything. |
User 48944 replied at 2024-7-29 10:40 Hello, As for client display issue，I need to double check with the R&D team. It may take some time to double check with our R&D team. I will reply to the result here and inform you by email. Please pay attention. |
GTAC-Micca replied at 2024-7-29 13:19Hello, We discussed this issue and tried to reproduce it. However, the problem did not occur again on our local devices. May I know what your gateway device is? Is this domain name and port released on your gateway? If not, pls test and check again: http://macclog-as.rj.link/macclog/log/upload + port 80 Best Regards, Micca |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
