how i can isolate my network from guest

i need crate wifi for guest and guest no need acces to my network
i can show one option there isolation but still im getting acces to my local network  

Dear,

Do you want to configure guest wifi to prevent this network segment from accessing other network segments? This requires an ACL implementation, which RAP does not support. You need to use EG to do this.

Best regards,
Micca

GTAC-Micca replied at 2024-9-3 09:14
Dear,

Do you want to configure guest wifi to prevent this network segment from accessing other netw ...

Hi for this concern, is the guest wifi option in creating SSID applicable? i just notice when creating SSID, there are options there like General, IoT, Guest...
Also is AP-Based Rate Limiting available on RAP2260(G) without gateway?

Kevin Bryan Laurea replied at 2024-9-5 08:28
Hi for this concern, is the guest wifi option in creating SSID applicable? i just notice when crea ...

Hello,

1.  Answer about guest wifi:
It can prevent communication between clients connected to this SSID on this AP(cross-AP isolation is not supported).
If you need cross-vlan isolation, you need EG device  to configuire ACL

2. Answer about  AP-Based Rate Limiting:
RAP2260(G) can support it without gateway.

Best regards,
Micca