|
LP: The POE of all downlink ports is not full load P: All downlink ports can get full POE load HP: All downlink POE+ ports are fully load UP: Some downlink ports have the power supplycapacity of 60W or 90W PoE Full Load • Definition: A PoE switch or injector is considered to be operating at full load when it is providing the maximum power output to all of its connected PoE-powered devices(PDs). • Example: If a PoE switch has 24 ports, each capable of delivering 30W according to the802.3at (PoE+) standard, then the switch is at full load when all 24 ports aresupplying 30W of power to the connected devices. • PoE Standards: The current PoE standards include: ￮ 802.3af(PoE): up to 15.4W per port. ￮ 802.3at(PoE+): up to 30W per port. ￮ 802.3bt(PoE++): up to 90W per port. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
