Forgot password?
 Register now

Welcome to use this form to feedback your problems with Ruijie Community

The category of your feedback

Your Feedback

Your Email address (optional):

【Typical Case】How to Troubleshoot Password Recovery Failures Using the Password Recovery Method in RGOS 11.x on an RG-S2915 Switch? Reply

GTAC-Sophia

Level 5

Ruijie Staff

【Typical Case】How to Troubleshoot Password Recovery Failures Using the Password Recovery Method in RGOS 11.x on an RG-S2915 Switch?
240 0 2024-10-8 11:20:54
Original
Keywords
S2915, Password Recovery Failures
Issue Description

(1) The password recovery methods in RGOS 11.X cannot be used to recover the password of an S2915 switch.


There are two password recovery methods in RGOS 11.X:
1. How to recover the password of Ruijie switch if it doesn't support "main_config_password_clear" command - Switch - Ruijie Community (ruijienetworks.com)
2. How to reset password on switch for RGOS 11.X? - Switch - Ruijie Community (ruijienetworks.com)
Device Model and Firmware

  Device Type
  
  Device Model
  
  Firmware Version
  
  Access  switch
  
  S2915-24GT4MS-P-L
  
  S2915-L  RGOS 11.4(1)B82
  
Cause Analysis

1. Check the device model and version.

2. The attempt to use two password recovery methods in RGOS 11.X fails.
3. The password is successfully restored using the password recovery method in RGOS 12.X.
(1)Restart the switch and press Ctrl+C.
(2)Select 4. Scattered utilities.
(3)Select 4. Run main without enable password.


Root Cause

Although the RG-S2915-L uses the RGOS 11.X operating system, you need to use the password recovery method in RGOS 12.X for password recovery.
Solution

1. The password recovery method for the S2915-L series is slightly different from that of RGOS12.X. The steps are as follows:
1.Password Recovery Guide for Devices Running RGOS12.X
How to reset the password of RGOS 12.X device? - Switch - Ruijie Community (ruijienetworks.com)
2.Password Recovery Guide for RG-2915-L Switches
(1) Restart the switch and press Ctrl+C.
(2)Select 4. Scattered utilities.
(3)Select 4. Run main without enable password.


RG-NBR6215-E

Configuration Router
There are no replies.
Related Posts
Product Model

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2023 Ruijie Networks Co,Ltd