Forgot password?
 Register now

Welcome to use this form to feedback your problems with Ruijie Community

The category of your feedback

Your Feedback

Your Email address (optional):

cloud different project same SSID Reply

Abdullah KIR

Level 1

cloud different project same SSID
216 14 2024-11-4 19:25:18
Original
I have multiple projects. The changes I made in the SSID settings of my 5 projects started to be applied synchronously in other projects. When I publish SSID as Net in the 1st project, the other 4 projects also broadcast wifi as Net and with the same password. I have this problem on the cloud, but everything looks normal in the mobile application.

Ruijie Cloud

wifi Ruijie Cloud
0 2024-11-4 19:51:17 View all replies
Dear sir,
Good day.
Could you please kindly share me with screenshot? You mean you have multiple AP group or project?
SSID between project wil not affect each other, and according to your desciption, I think what you're saying is about AP group. And in the AP group, the first group is the main group, which will apply the configuration to all APs in the other groups.
If I'm misunderstanding the issue that you you're encountering, please kindly correct me. I'll help you with it.
Best regards,
Lex

0 2024-11-4 19:58:35 View all replies
GTAC-Lex replied at 2024-11-4 19:51
Dear sir,
Good day.
Could you please kindly share me with screenshot? You mean you have multiple AP ...
I have 4 projects in the form of a b c and d, all of them have aps in different models, and when I publish SSID as ASD in project c, SSID with the same name starts to be published in projects a b and d, the existing SSID in those projects is deleted and the ASD SSID I created in project C comes instead. When I add a new SSID in addition to the ASD SSID as QWE in project B, 2 SSIDs are published in projects a b c and d: ASD and QWE

0 2024-11-4 23:46:53 View all replies
Abdullah KIR replied at 2024-11-4 19:58
GTAC-Lex replied at 2024-11-4 19:51
Dear sir,
Good day.

Dear Kir,
From your description, it is likely caused by the device groups settings. Could you check if the correct device group is selected in the SSID configuration page?


0 2024-11-5 14:17:57 View all replies
GTAC-Ryan replied at 2024-11-4 23:46
Dear Kir,
From your description, it is likely caused by the device groups settings. Could you chec ...

each group has its own SSID group
a ssid group in a project
b ssid group in b project
of course there was no such problem in my previous groups. as I mentioned at the beginning of the post new project opened AP added. AP Deleted. project deleted. after these operations I started to get this error in 7 of the 29 projects I had previously created

0 2024-11-6 09:42:40 View all replies
Abdullah KIR replied at 2024-11-5 14:17
each group has its own SSID group
a ssid group in a project
b ssid group in b project

Dear sir,
Good day.
Have you tried reset the devices before adding it to another project?
We encourage you to reach out to us through RITA(
www.ruijienetworks.com/rita), our real-time support platform. Our dedicated engineers are readily available to resolve your issues promptly.

Best regards,

Lex

0 2024-11-6 16:22:21 View all replies
Edited by Abdullah KIR at 2024-11-6 18:39

GTAC-Lex replied at 2024-11-6 09:42
Dear sir,
Good day.
Have you tried reset the devices before adding it to another project?
Dear Sir,
Good day.


My projects are different and it is not possible for me to physically access the devices in remote locations. my solution for now is that I have broadcast encrypted SSIDs with the names a b c d for 4 locations. the devices can connect. but if I transfer the devices in the projects to another project, there are smart home devices etc. that are currently connected. it will be difficult to reconnect them. so it will not be possible to reset the devices or move them to another project.

best regards

0 2024-11-6 20:19:19 View all replies
Abdullah KIR replied at 2024-11-6 16:22
GTAC-Lex replied at 2024-11-6 09:42
Dear sir,
Good day.

dear sir

note: a b c d SSIDs are automatically added when I create a new project

0 2024-11-6 21:10:12 View all replies
Abdullah KIR replied at 2024-11-6 20:19
dear sir

note: a b c d SSIDs are automatically added when I create a new project

Hello,

Would you mind kindly share the cloud SSID setting and device group setting with us?

Best regards,
Micca

0 2024-11-7 14:15:15 View all replies
Edited by Abdullah KIR at 2024-11-7 14:24

GTAC-Micca replied at 2024-11-6 21:10
Hello,

Would you mind kindly share the cloud SSID setting and device group setting with us?
dear sir



0 2024-11-7 16:37:52 View all replies
Abdullah KIR replied at 2024-11-7 14:15
GTAC-Micca replied at 2024-11-6 21:10
Hello,

Dear sir,
Good day.
Let me confirm your question:
You configured the SSID for the AP in one project, and then added the AP to another project. But when you changed the SSID in the original project, you found that it would synchronize the SSID to the AP that originally belonged to this project but is now in another project, right?
If possible, please go to our live chat platform RITA(
www.ruijienetworks.com/rita ),so that we can better communicate in real time and locate the problem you encountered, or you can share your cloud account with me to my email: v-xiewenyu@ruijie.com.cn, and I will help you check it.
Best regards,
Lex

0 2024-11-9 13:52:39 View all replies
GTAC-Lex replied at 2024-11-7 16:37
Dear sir,
Good day.
Let me confirm your question:

partly true.
I configured the device in a project that has never been installed before. the settings I made in this project synchronize to 9 out of 30 projects.

0 2024-11-9 16:29:13 View all replies
Abdullah KIR replied at 2024-11-9 13:52
partly true.
I configured the device in a project that has never been installed before. the settin ...

Hi, the issue may caused by this share configuration function, it appears when you add new project. it will share ssid configuration to another project.



0 2024-11-9 18:26:31 View all replies
GTAC-Rachel replied at 2024-11-9 16:29
Hi, the issue may caused by this share configuration function, it appears when you add new project ...

I can't see the wireless settings window, I can't see it when creating a new project

0 2024-11-11 13:23:23 View all replies
Abdullah KIR replied at 2024-11-9 18:26
I can't see the wireless settings window, I can't see it when creating a new project

Dear Abdullah,
Good day.
You can see it here:









For your case we suggest you visit our live chat platform RITA so that our engineer can diagnose more specifically.
Best regards,
Lex

Related Posts
Product Model

Share this topic to

Cancel

This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.

More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.

©2000-2023 Ruijie Networks Co,Ltd