How to reset AP password

I forget my AP password, how can I reset it?

Fit mode

When you login in fit mode using console port ,its default password is ruijie apdebug.

Fat mode

When you login in fit mode using console port ,its default enable password is admin
when you forget your password, you can reset itrefer to the guide as blew:

I. Network Topology

II. Requirements

1. Finish reading System Management--> Console Management.

2. Login AP CLI via Console.

III. Configuration Steps

Recovering AP password (configurationfile remains)

1. Power off AP, then power up.

2. Press CTRL + C, enter CTRL mode.

3. Input CTRL+Q, enter uboot mode. Andthen input "main_config_password_clear"

4. Device will reload automatically.

3.      When finish reloading, enterCLI without input password.

Note: The default timeout period is10min. Please change your password before time out.

4.      Change password, and then usethe command “wr” to save your configuration.

5.      save configuration

Re-login AP, execute commands "showruning-config" to check configurations.

If "main_config_password_clear" don't work. You can refer to this guide to reset its password
1. Ctrl +C Ctrl +Q
2. Import ubootui and then press  enter  Ctrl+P
3.import 'setenv runlevel 1'
4.import 'run linux'
5.cd/data
6.cat config. text  ----if the password is clear password, you can find it there directly
7.rm -rf config. text
8.reboot and then repeat step 1 and step 2
9.setenv runlevel 3
10.saveenv
11. run linux
12.delete the enable password commond