|
Ruijie# configure terminal Ruijie(config)# interface gigabitEthernet 0/1 Ruijie(config-if-GigabitEthernet 0/1)# switchportmode hybrid Ruijie(config-if-GigabitEthernet 0/1)# switchporthybrid native vlan 3 ---- Native vlan is 3. If no vlan-marked data enters this interface, it will mark vlan3 for the data packet. If data with vlan 3 entersor leaves this interface, the vlan3 tag will be removed. Ruijie(config-if-GigabitEthernet 0/1)# switchporthybrid allows vlan untagged 20-30 ----If a data tag with VLAN 20 or VLAN 30 enters or leaves this interface, the VLAN tag will be removed Ruijie(config-if-GigabitEthernet 0/1)# end |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 5
