|
For the hotel scenario, there is a typical requirement about to isolate every client according different rooms, we know that with client isolation we can reach such requirement, but since that every single STA is isolated, which can be a stumbling stone for use of service like Chromecast, or some IoT service. The purpose of this function is to isolate clients in the network per room. 1. Introduction of GPSK The GPSK function consists in mapping the every single password to VLAN for the same ssid:  2. Configuration step a）Configure SSID, click Config>WLAN>Add WiFi>Add WiFi/ WLAN  Enable the PPSK option when configure the WLAN, and click Next  On next page, select LIST as below, and fill VLAN IDs whiches are mapped to different password for each room then click Finish.  b) Configure PPSK/GPSK Click Config>WLAN>PPSK>GPSK> Generate GPSK  we can fill the infomation which maps the key(password) with VLAN for a single SSID created in the previous step , then click Save  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
