Command to remove nat translation on NBR
|
Hi all, I need to clean oldNAT translations, can you please provide the command? ROUTER#sh ip nat translations Pro Inside global Inside local Outside local Outside global udp 2.40.249.27:5060 10.13.2.2:5060 83.211.227.21:5060 83.211.227.21:5060 tcp 2.40.249.27:58628 10.13.102.21:58628 104.102.28.30:443 104.102.28.30:443 tcp 2.40.249.27:59788 10.13.102.40:59788 165.225.202.15:443 165.225.202.15:443 udp 2.40.249.27:9993 192.168.3.201:9993 188.217.173.131:57803 188.217.173.131:57803 udp 2.40.249.28:9993 10.13.90.209:9993 82.62.95.221:56642 82.62.95.221:56642 tcp 2.40.249.27:54779 10.13.102.194:54779 20.135.25.5:443 20.135.25.5:443 udp 2.40.249.27:24009 10.13.90.209:24009 172.16.1.223:40748 172.16.1.223:40748 tcp 2.40.249.27:59791 10.13.102.40:59791 165.225.202.15:443 165.225.202.15:443 udp 2.40.249.27:61902 10.13.102.21:61902 157.240.231.19:443 157.240.231.19:443 udp 2.40.249.27:38456 10.13.90.201:62700 79.52.35.191:63897 79.52.35.191:63897 udp 2.40.249.28:24009 10.13.90.209:24009 95.230.222.209:1042 95.230.222.209:1042 udp 2.40.249.27:23746 10.13.90.209:23746 192.168.1.90:9993 192.168.1.90:9993 udp 2.40.249.27:60428 10.13.102.9:60428 142.251.209.10:443 142.251.209.10:443 tcp 2.40.249.27:60504 10.13.90.76:60504 20.190.147.9:443 20.190.147.9:443 udp 2.40.249.27:53935 10.13.102.51:53935 216.58.204.131:443 216.58.204.131:443 tcp 2.40.249.27:60782 10.13.90.21:60782 151.84.87.232:10051 151.84.87.232:10051 udp 2.40.249.28:7547 10.13.7.123:7547 18.153.145.167:3478 18.153.145.167:3478 I have to remove only translation from IP 2.40.249.28 (no more configured) I don't find the command to do it ROUTER#clear ip nat ? cycle Clear ip nat cycle info error Clear ip nat error info exception Clear ip nat exception h323-sta Clear ip nat H323 packet statistics pkt-info Clear ip nat pkt info Can you please suggest? Thanks Marco |
|
Hello, I will comfirm the command for you. may you pls provide your devide firmware version please? Best regards, Micca |
GTAC-Micca replied at 2024-11-29 18:43 Hi Micca, this is the fw version present in the router(latest one): NBR_RGOS 11.9(6)B17P3, Release(11203004) Thanks Marco |
Mturco84 replied at 2024-11-29 18:48 Hello, Please use command: clear ip f f If you need delete a specific one, you can use command find the flow id first, show ip f p 1  then use command + flow id to clear: clear ip f f [folw id]  Bet regard, Mica |
GTAC-Micca replied at 2024-11-29 20:27 Hi Micca, thanks it worked fine! |
Mturco84 replied at 2024-11-29 22:18 [color=rgba(0, 0, 0, 0.85)]Thank you for reaching out. If you have any further questions, we are always delighted to assist you! |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
