Can't setup snmp public on ruijie access point

Dear team

I cant setup SNMP server with community public on ruijie access point series Ruijie AP820-L(V2), firmware AP_RGOS 11.9(6)W3B1, Release(11160201). The capture below
WIFI-5.4_INT-SUPPORT(config)#snmp-server community public ro
%Error: The community(public) is a weak community, not allowed to configure!
Fyi the settings on the Ruijie switch are ok please see below
snmp-server enable traps
snmp-server community public ro
!
line console 0
line vty 0 4
login local
!
end
SW2-LT2-ZONE2#sh ver
System description      : Ruijie 10G Ethernet Switch with PoE (S2910C-48GT2XS-HP-E) By Ruijie Networks
System start time       : 2024-12-14 10:49:34
System uptime           : 4:03:53:47
System hardware version : 1.74
System software version : S29_RGOS 11.4(1)B70P1
System patch number     : NA
System serial number    : G1PA0KF00341A
System boot version     : 1.2.28
Module information:
  Slot 0 : S2910C-48GT2XS-HP-E
  Cpu 0:
    Hardware version    : 1.74
    Boot version        : 1.2
    Software version    : S29_RGOS 11.4(1)B70P1
    Serial number       : G1PA0KF00341A
SW2-LT2-ZONE2#

anyone can help me ?

Thank you

The public password you used is a weak password, we are not allowed to configure this password, you can change the password, and then the configuration will be successful