RG-RAP6260(H) After Changing from AP mode to Router Mode I don't have access from WEB.
|
Hi everyone after moving RG-RAP6260(H) from AP mode to Router Mode I can't access it's web interface but can ping. RG-RAP6260(H) is getting IP from DHCP and i see devices MAC address on router and also can be pinged from router and also from PC.Is there any specific requirement or IP address after changing from AP to Router mode ? |
|
Hello Roin, Is the device online in cloud? If you try to access through tunnel eweb is letting you? What is the message that you are obtaining when try to open it? Regards! |
TAC-Saul replied at 2025-1-18 01:13 Device isn't in cloud our customer don't want to have device in Cloud. Topology is next Cisco Router> Ruijie SW CS83 > RG-RAP6260(H). If device is in AP mode it works good but as soon as we move it to router mode we lose access to it with web. Message we get when we try to connect is just like that we can't access to it. When we move from AP to Router mode device gets reset correct? also is any specific IP we have to access? |
Roin Lapachi replied at 2025-1-18 01:20 Roni, if you ping the ip of the AP once router mode it is responding you? Yes once device is changed work mode, they will be restored and rebooted. You need to acccess them through their default ip 10.44.77.254 Regards |
TAC-Saul replied at 2025-1-22 06:02 Hi Yes i Can ping device. Device is connected to Cisco Router, Cisco gives DHCP to Ruijie Switch and also it gives IP to AP. Ruijie AP get's IP normally and works great also Reyee AP is working great in AP mode. But as soon i move AP mode to Router Mode. Device can be pinged but can't access to it's web interface. Also Tried to access it's default IP 10.44.77.254 but when we're trying that we can't ping it. |
Roin Lapachi replied at 2025-1-22 14:57 Hello, May I know whether you test device current DHCP address and 10.44.77.235? Best regards, Micca |
GTAC-Micca replied at 2025-1-22 16:54 DHCP was giving 192.168.1.0/24 network. I haven't tested 10.44.77.0 network. When was giving 1.0/24 network Device was getting IP and was able to ping too but wasn't able to access web. Haven't that problem in AP mode |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
