[ASK] How to assign /29 address in NBR6215-E?

Hello,
I just bought NBR6215-E, and I am looking how to assign my IP Block /29 from my ISP. let's say for example 172.16.123.1/29 I want to add the remaining IPs to be secondary IP. Also, how to setup 1:1 NAT?
Thank you.

Hello,

Please check this link to configuire :
https://reyee.ruijie.com/en-global/support/documents/slide_reyee-rg-nbr-series-routers-web-based-configuration-guide/#





Best regards,
Micca

GTAC-Micca replied at 2025-2-20 17:48
Hello,

Please check this link to configuire :

Hi Micca,

Does the NAT port mapping works bidirectional? in some case, an email server need to be NAT-ed with specific external IP. Using NAT rules could solve this case?

Sogi White replied at 2025-2-20 18:01
Hi Micca,

Does the NAT port mapping works bidirectional? in some case, an email server need to be ...

Dear customer,
The Port mapping is not bidirectional. If you need to access a device in another network, you will need to create port mapping for it in that network.

GTAC-Ryan replied at 2025-2-20 20:43
Dear customer,
The Port mapping is not bidirectional. If you need to access a device in another ne ...

Hello,
In my case, I need to map the internal server to certain external IP Address. Does the NAT Pool & NAT Rule can accomplish that?

Sogi White replied at 2025-2-20 21:07
Hello,
In my case, I need to map the internal server to certain external IP Address. Does the NAT  ...

hi，sir
yes ，it can support


bset regard
Alan