Configure Rujjie RG-NBR6205-E VLAN Rules

I would like to know how to create rules to access VLAN 20 from VLAN10, since the switch is also from Ruijie and I already have the ports configured with VLANs on the switch. For example, port 3 of the switch has VLAN 20 and port 4 (192.168.20.24) has VLAN 10 (192.168.10.254). Now I want to ping a device that is on port 3 with VLAN 20 and where I have the device to be used on port 4 VLAN 10. I am using a RG-NBR6205-E.
Can you help with this topic, please?

Hello Miguel,
The NBR by default has the inter-vlan routing enabled. The ping and communication between devices must be sucessfull.

Regards!

TAC-Saul replied at 2025-3-13 05:04
Hello Miguel,
The NBR by default has the inter-vlan routing enabled. The ping and communication bet ...

Ok and thanks for the answer.
But how do I disable the NBR by default "Inter-vlan" so I can create rules on this device, create a rule for example that vlan10 accesses vlan20 or that the IP of a device that is in vlan10 accesses a device that has the IP of vlan20.

Miguel Nunes replied at 2025-3-13 06:28
Ok and thanks for the answer.
But how do I disable the NBR by default "Inter-vlan" so I can create ...

to block the comunication between vlans you need to create access list (ACL) blocking the communication, you can check this post about it
https://community.ruijienetworks.com/forum.php?mod=viewthread&tid=3035
Regards!

TAC-Saul replied at 2025-3-13 23:48
to block the comunication between vlans you need to create access list (ACL) blocking the communic ...

Thank you, I'll try to see that, if I can't, can you help me more or access the PC I'm testing on?