how to setup VLAN Steering over Captive Portal Login

How to setup VLAN Steering over Captive Portal Login?
Rightnow I can only use user group that designated to same Vlan that Wifi SSID have.
so rightnow I have 3 Vlan with 3 separated SSID.
but what I want is, just to use 1 SSID, but the user IP Vlan will be determined by User Group/user ID via captive portal.
Can I do that?

Dear Customer,
May I know which product/model of Ruijie you are deploying?

GTAC-Oliver replied at 2025-6-20 08:27
Dear Customer,
May I know which product/model of Ruijie you are deploying?

currently I was using EG305GH-P-E as router and RAP2266 for AP.
I was looking for a way to decreased the number of my SSID as little as possible (using 4 rightnow for 4 different subnet).
I think the Captive portal might be a good idea, since I can control which user can go to which subnet from the user group. but I got stuck at SSID native Vlan, so maybe there is any other way around?

Richard Lie replied at 2025-7-1 09:52
currently I was using EG305GH-P-E as router and RAP2266 for AP.
I was looking for a way to decreas ...

Dear Customer,


Do you mean that users connect to an SSID to obtain different subnets? If so, you can configure it within the SSID


And if you want to open the portal for SSID, you can use AP as the authentication device


best regards