How to reset AP?

How to reset AP?

We need to divide this circumstances into several scenarios:

Scenarios 1: if the ap is in fit mode,we can login to the ac, and excute the command:" ac-controller
                                                                                                                                          factory-reset apname"
                     we can also login to the AP, and excute the command : "Ruijie#apm factory-reset"

Scenarios 2 : if the ap is in fat mode, we can login to the ap via console or telnet, and excute the command: "delete config.text", then restart the ap.                  

                     
If this model of ap has a "reset" button, we can press the button for more than three seonds to reset the AP.

How to access to AP due to I just was delete all config VLAN and plug in to Router again can't get IP DHCP

Sathit@cyn.co.t replied at 2018-6-14 16:27
How to access to AP due to I just was delete all config VLAN and plug in to Router again can't get I ...

You may access to it via console port or use the "reset" button to reset the AP

The reset button for AP720-I is only used to restart the device instead of restoring the factory default setting, press the button for few seconds, the device reboots in about 20 seconds.

Hi,

I have also issue reset AP710. I cannot login using admin/admin. I tried to reset the device using the reset button because I don't have console cable. But still I cannot do login eventhough it was reset already. Please help.

Thank you

dioscoro.barte@ replied at 2019-5-31 15:03
Hi,

I have also issue reset AP710. I cannot login using admin/admin. I tried to reset the device us ...

How to return to factory settings for ap520 with console cable