|
Requirement Capture the packet between switch and radius server  1. Download and install Wireshark on a computer for packets capturing, and connect the computer to one of the devicer's port. https://www.wireshark.org/ 2. confgiure port mirror on switch, so that PC can capture the packet of the port gi 0/3. Ruijie(config)#monitor session 1 source interface gigabitEthernet 0/3 both ----you can change the port by ture Ruijie(config)#monitor session 1 destination interface gigabitEthernet 0/1 switch 3. Run Wireshark (as administrator), double-click the network Interface connecting to the device  4. Then can see the packets and wait until you got the packet you need, then click the stop button.  5. Save the file.  |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
