How to recover/reset firmware of RG-EW1200G PRO?
|
I have already tried resetting the router many times through the reset button. It was working at first. I tried updating the firmware when suddenly the power got interrupted while updating the firmware. When the power got back on, I can no longer access the default gateway 192.168.110.1 or the web based gateway/portal. Please help. |
|
Edited by yujiamin@ruijie.com.cn at 2021-8-19 15:51 power on the device, and press and hold the Reset button for 5s or more, and release the Reset button after the system LED indicator blinks. The device automatically restores the factory settings and restarts. The original configuration will be lost after the factory settings are restored. After the restoration, the default management address is http://10.44.77.254. You can set the username and password upon first login. |
| Sorry current don't support. will support in the future |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
