|
Introduction of IPTV l Reyee EG IPTV is used for providinge IPTV and IP-Phone function in the same cable. Application Scenario Scenario 1:
Scenario 2:
Solution: (1) Connect the ISP cable with WAN port, and connect your PC with LAN port. Using the default IP 192.168.110.1 to login Reyee EG and then refer to the wizard to let your EG can access Internet successfully. (2) Click Setup->Basics->IPTV/VLAN
1) If you are in following regions, you can choose the mode directly.  2) If you are not in these regions, you can choose custom, and contact with ISP for the IPTV setting, then connect the IPTV and IP-Phone with related LAN ports. For example, the IPTV VLAN is 100, IP-Phone VLAN is 200 and the . Internet VLAN ID is 300.  3) If you are scenario 2, after configuring IPTV setting on Reyee EG, you need to configure the IPTV VLAN 100 on WALL AP LAN port. If you are scenario 1, please ignore this step. Click Wireless->LAN Ports->Add  Configure VLAN ID to be 100, Applied to WALL AP. 
● Firmware EG_3.0(1)B11P55 or later can support IPTV. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
(3) Configure the IPTV VLAN ID or IP-Phone VLAN ID:
Note
