How can we configure port aggregation on NBS switch with EG3230/EG3250

Step1: Check whether both NBS switch and Ruijie EG can support port aggregation. After check that both NBS switch and Ruijie EG can support static port aggregation, then we can configure port aggregation with them.
Step2: Configure static port aggregation on NBS switch.

Global Settings
Select a value from the Load Balance Algorithm drop-down list box, and click Save.
Adding anaggregate port
Enter an aggregate port ID, select member ports (ports that have been added to another aggregate port cannot be selected), and click Save. The message "Operation succeeded." is displayed. The port panel displays the added aggregate port.
Tips:
1.A port that has been added to an aggregate port cannot be selected and added to another one.
2.After an aggregate port is deleted, its member ports are restored to the default settings and are disabled.

3.An aggregate port contains a maximum of eight member ports.


Step3: Configure static port aggregation on EG3230/EG3250.


Click . In the window displayed, select an aggregate port and member ports, and click .


Step4: Configure the access mode of the EG.

Select the required access mode, and click . The device switches to the selected mode successfully after restart.

Right? Great sharing!  happy wheels

havenhaven0268@ replied at 2022-3-7 17:47
Right? Great sharing!  happy wheels

thank you