Network Topology Configuration Steps Step 1: Configure the corresponding gateway ip address on the EG LAN interface Choose Network > Interface > Basic Setting > LAN Config, for example, if the IP address of VLAN 1 is 192.168.1.x, configure the gateway address as 192.168.1.1.  Step 2: Enable DHCP function and configure DHCP server configuration on the EG Choose Network > DHCP > DHCP button > Add DHCP, the the address pool range is in the same address segment as gateway address.  Step 3: Configure the native vlan of the switch port connected to the AP to the corresponding vlan, the switch port native vlan 1 by default, then the AP will get the corresponding vlan ip you configured. |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 4
