IP, Mac, VLAN matching on access points

Hello, I want each of the personnel connected to the access points to be assigned to separate vlans. This is possible on switches, but is this possible on access points? How can I do this?

You mean you want to set vlan for this RAP? If yes, you can check on here:

GTAC-Micca replied at 2024-1-8 23:12
You mean you want to set vlan for this RAP? If yes, you can check on here:

no that is not my question. I want to distribute ip from different vlans to people connected to the wifi network

Mert Özsoy replied at 2024-1-9 05:24
no that is not my question. I want to distribute ip from different vlans to people connected to th ...

Dear,
It is possible to distribute different VLANs (network segments) through an AP.
This is done via SSIDs, the numer of SSIDs suported on the APs depends on the AP model.
* For example: The RAP2260 supports 8 SSIDs,  meaning you canselect 8 vlans for  each SSID.




* The VLAN selection is  done in the configuration of the SSID.



Best regards,
Karen | Support team.

AnaKarenDuranUrrutia replied at 2024-1-9 06:36
Dear,
It is possible to distribute different VLANs (network segments) through an AP.
This is done ...

Can't I automatically assign the user who connects to the wireless network to that VLAN? With a single SSID.

Mert Özsoy replied at 2024-1-9 21:45
Can't I automatically assign the user who connects to the wireless network to that VLAN? With a si ...

One SSID can be associated with only one vlan

first create groups for each access point. then from the switch apply the vlan to the accesspoint. anyone connected to that access point will be on that vlan.
each ap can be assigned a vlan. it is also possible to assign each ssid with a vlan aswell however generally the aps can only do around 8ssids(so 8 vlans).