Set up access point AP-820l (V2)
|
How to set up access point AP-820l (V2) to use concurrent client? Now, if using more than 40 client is very slow in the 5GHz band, but if client are less than 40 will be fast. give me some advice Seen in the specification, up to 1024 client |
|
Dear sir, Sorry that the Maximum clients per AP is 1024, but t he recommend clients of AP820-L(V2) is 64 clients(2.4G+5G: 32+32), https://www.ruijienetworks.com/products/wireless/indoor-access-point-series/rg-ap820-l-v2/specification  |
GTAC-Daisy replied at 2022-12-4 16:42 Recommended Client: 64. Thank |
|
Hi Bro, In case you find any a problem when clients connected with access point was speed bandwidth slow first step please check with envelopment interference signal and please recheck with you configure turn on mu-mimo ,Chanel-Width , and for clients based on data can support up to 1024 STA it's AC Controller mode |
This site contains user submitted content, comments and opinions and is for informational purposes only. Ruijie may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Ruijie can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Ruijie disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the Ruijie Community Terms of Use.
More ways to get help: Visit Support Videos, call us via Service Hotline, Facebook or Live Chat.
©2000-2023 Ruijie Networks Co,Ltd
Level 1
